Fold and assemble the Kirin G3 Pro Scooter

Fold and assemble the Kirin G3 Pro Scooter

Please ensure that the power of G3 has been turned off before assembling the scooter.
Most of the parts have been assembled before leaving the factory. A few parts are required to be assembled before riding.

Handlebars assembly

  1. Following the shown image, adjust the direction of the handlebar faucet.
    Make sure the brake on the left side faces frontward, and the thumb accelerator on the right side faces backward.
  2. Align & insert the mounting base in the faucet fixing seat.
  3. Adjust the direction and fix it with four screws.

Kickstand of E-scooter

  1. Insert the rear fender into the installation position where the left and right suspension arms are.
  2. Pay attention to the left and right direction, Only in the correct direction, the rear fender can be inserted normally.
  3. Just screw it tightly.

Kickstand of E-scooter

  1. Find the kickstand beside the pedal
  2. Push the kickstand down

Fold the scooter

  1. Loosen the folding set screw until the screw is out of the fold
  2. Put down the steering pole.
  3. Hang the locking ribbon to the bottom of the rear pedal

https://manuals.plus/

Comments

Post a Comment

Popular posts from this blog

KUGOO KIRIN G3: BATTERY LIFE

Image
KUGOO KIRIN G3: BATTERY LIFE Range is fantastic No percentage displayed on screen Real-time power draw stats on screen As mentioned in the previous section, the Kirin G3’s battery is massive. With 936Wh juicing a 1200W motor, Kugoo advertises a 37 mile total range. We couldn’t find what conditions Kugoo got that number with, but we tested the scooter over about 25 total miles up and down various hills around Uptown Charlotte. The trip was split between roads that connect a couple landmarks and parks, and the Little Sugar Creek Greenway, all of which can get fairly hilly in many places.  After the 25-mile, two and a half hour trip that we mostly made on speed mode 2 (max speed ~22MPH), the battery indicated about 60% remaining capacity. This bodes very well for the capacity of the rest of the battery, as we estimate that you could likely ride for much longer than we did on a single charge without worrying about running out of juice. Speakin...
Read more

Product introduction Kirin G3 Pro Scooter

Image
Product introduction Kirin G3 Pro Scooter Packing List G3 e-scooter x 1 Charger xl Instruction xl Setting Tool xl Diagram of KUGOO KIRIN G3 1 handlebar 19 front light 2 steering bar 20 side reflector 3 braking & bell 21 side light cover 4 accelerator 22 deck 5 power Button 23 toot pedal 6 handlebar base 24 DC IN 7 locking ribbon 25 rear deck cover 8 display 26 rear suspension 9 steering pole 27 rear deck bottom cover 10 folding screw 28 rear disc brake 11 front reflector 29 rear wheel 12 folding bar 30 rear fender ...
Read more

KUGOO KIRIN G3: PERFORMANCE

Image
KUGOO KIRIN G3: PERFORMANCE Zero issues with hills Powerful motor provides great acceleration Motor and brake control aren’t very granular As mentioned above, we tested the Kugoo Kirin G3 in a fairly hilly area, and the scooter handled those hills with grace. The steepest incline we encountered saw the scooter reach 12-15MPH on speed mode 3 which, while obviously slower than it can go on flat terrain, beats walking by a landslide.  The riding experience overall was very smooth, with the scooter taking well to bumps and drops on roads and sidewalks since the wheels raise it high off the ground. We even rode the scooter off a few curbs to see if the height difference would scrape the underside of the scooter, but it didn’t harm it one bit.  The Kirin G3 is also advertised as an “off-road” scooter, so naturally we tested that as well. In a park where the grass and dirt wasn’t completely level and even, ...
Read more