Battery charge & Usage Kirin G3 Pro Scooter

Battery charge & Usage Kirin G3 Pro Scooter

Please charge the scooter before use.

How to charge

  1. Turn off the scooter before you start to charge.
  2. Find the charging pot and insert the charger into the socket.
  3. Use the right charger.
  4. The light will be red while charging.
  5. The light will be green when charging is completed.
    If it is the first charge, please charge the E-scooter at least 12 hours before using it.
    Under no circumstances should you use a scooter while charging.
    Do not charge for longer than necessary. The standard charging time is about 12 hours (18ah battery).
    Charging too long can affect battery life and performance.
    To extend battery life, charge it at least every two months.

Battery standard

Components  Parameter 
Type of the battery Rechargeable lithium ions
Charging time 10-12hours
Voltage 52V/48V
Battery capacity 18Ah/15Ah
Operating temperature -10C to 40C
Charging temperature 5Cto 45C
Storage temperature -20C to 50C
KWh 936Wh/720Wh
Protection Overcharge, overdischarge, and overheat automatically shut down

Usage

Before riding the G3, please read the following information.
You have to wear a helmet and other protective clothing.
Only under 100Kg are allowed.
Obey the local law.
The G3 contains the motor, which may be classified as a motor vehicle according to your local regulations. It is your responsibility to comply with local regulations.

Riding teaching
Suppose you are wearing appropriate protective gear and have placed your scooter on a level road with sufficient power, follow these steps.

Hold the handlebars with your hands and put your right foot on the deck. With little left foot push(Skm/h) to engine scooter and Right hand triggers the accelerator for riding. Keep your body and scooter balanced by looking straight ahead
Turn the handle with both hands. To slow or stop the scooter, release trigger and hold the handbrake.
Leave one foot on ground to keep the balance after scooter stopped.

 To turn off the scooter, please press the turn off button for 3 seconds after scooter stopped.

Practice guidelines
Please practice riding until you can easily use all scooter functions. See the tips below.

  • Avoid passing through anything that may stick on or stuck in the wheels.
  • Wear fat shoes for fexibility and stability.
  • Keep practising until you can easily get on, forward, turn, stop and get off.
  • Riding on the road with a 20 degree slope is OK for G3, but not recommended.
  • G3 is preferred to relatively fat road conditions.
  • Do not ride on slopes, pedestrians or obstacles until you are profcient with the scooter.

The G3’s weight is about 25 KGs. Remember to fold the scooter before you pick it up.

https://manuals.plus/

Comments

Popular posts from this blog

KUGOO KIRIN G3: BATTERY LIFE

Product introduction Kirin G3 Pro Scooter

KUGOO KIRIN G3: PERFORMANCE